Allied Telesis x900-48FE-N User Manual
Page 2 | AlliedWare™ OS How To Note: EPSR
Which products and software versions does it apply to?
•
•
•
•
Next, it discusses important implementation details in the following sections:
•
•
•
•
Finally, it ends with troubleshooting information in the following sections:
•
•
•
•
Which products and software versions does it
apply to?
apply to?
This How To Note applies to the following Allied Telesis switches:
•
AT-8948, x900-48FE, x900-48FE-N, AT-9924T, AT-9924SP, and AT-9924T/4SP switches,
running software version 2.8.1 or later
running software version 2.8.1 or later
•
AT-9924Ts, x900-24XT, and x900-24XT-N switches running software version 3.1.1 or
later
later
EPSR is also available on the following Allied Telesis switches, running the AlliedWare Plus OS
software version 5.2.1 or later:
software version 5.2.1 or later:
•
SwitchBlade x908
•
x900 series
For information about using the AlliedWare Plus OS, see the AlliedWare Plus Note, How To
Configure EPSR (Ethernet Protection Switching Ring) to Protect a Ring from Loops. This Note is
available from
Configure EPSR (Ethernet Protection Switching Ring) to Protect a Ring from Loops. This Note is
available from
The implementation on the above switches is also compatible with EPSR on Allied
Telesis’
Telesis’
.