Allied Telesis AT-8100S/24 User Manual

Chapter 5: Assigning the Stack ID Numbers and Cabling the Stacking Ports

80

Power on one of the switches in the stack with these instructions.

1. Plug the power cord into the AC power connector on the back panel of 

the unit (see Figure 29).

If you are installing a DC powered switch, refer to “Powering On DC 
Switches” on page 97.

Power cord is used as a disconnection device. To de-energize 
equipment, disconnect the power cord.  E3

This unit might have more than one power cord. To reduce the risk 
of electric shock, disconnect all power cords before servicing the 
unit.  E30

Figure 29. Connecting the AC Power Cord