Allied Telesis AT-9000/52 User Manual
Chapter 11: Setting Port-based and Tagged VLANs
132
Adding an VLAN
To create an VLAN, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 19 on page 58.
2. From the Switching tab, select Virtual LANs.
The Virtual LANs page is displayed. See Figure 45 on page 130.
3. From the VLANs page, click Add.
The Add VLAN page is displayed. See Figure 46.
Figure 46. Add VLAN Page
4. Change the following settings as needed:
Vlan ID— Specifies a VLAN identifier. The range is 2 to 4094. The
VID 1 is reserved for the Default_VLAN. The VID cannot be the
same as the VID of an existing VLAN on the switch. If this VLAN is
unique in your network, its VID must also be unique. However, if
this VLAN is part of a larger VLAN that spans multiple switches,
the VID value for the VLAN must be the same on each switch. For
example, if you are creating a VLAN called Sales with a VID of 3
VID 1 is reserved for the Default_VLAN. The VID cannot be the
same as the VID of an existing VLAN on the switch. If this VLAN is
unique in your network, its VID must also be unique. However, if
this VLAN is part of a larger VLAN that spans multiple switches,
the VID value for the VLAN must be the same on each switch. For
example, if you are creating a VLAN called Sales with a VID of 3