Allied Telesis AT-9000/52 User Manual
AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide
139
Displaying Switch Spanning Tree Protocol Settings
To display the switch Spanning Tree Protocol settings do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 19 on page 58.
2. From the Switching tab, select Spanning Tree.
The Spanning Tree Settings page is displayed. See Figure 48.
Figure 48. Spanning Tree Settings Page
The following fields are displayed:
Active Protocol— Indicates if the active spanning tree protocol is
STP or RSTP. The default setting is RSTP.
STP or RSTP. The default setting is RSTP.
Status— Indicates if the spanning tree protocol is enabled or
disabled on the switch.
disabled on the switch.
Current Priority— By default, the current priority is set to 32,768.
You cannot change this field.
You cannot change this field.