Allied Telesis AT-9000/52 User Manual
AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide
147
Displaying and Modifying IGMP Snooping Configuration
To display and modify the IGMP Configuration settings, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 19 on page 58.
2. From the Switching tab, select IGMP.
The IGMP Snooping page is displayed. By default, the Configuration
tab is selected. See Figure 49.
tab is selected. See Figure 49.
Figure 49. IGMP Snooping Page with Configuration Tab
3. Change the following settings as needed:
Status— Indicates if IGMP Snooping is active or inactive. Select
“Enabled” to activate IGMP or “Disabled” to make this feature
inactive. When you enable IGMP, the switch begins to build its
multicast tables as queries from the multicast router and reports
from the host nodes arrive on its ports. When you disable IGMP,
“Enabled” to activate IGMP or “Disabled” to make this feature
inactive. When you enable IGMP, the switch begins to build its
multicast tables as queries from the multicast router and reports
from the host nodes arrive on its ports. When you disable IGMP,