Allied Telesis AT-PWR06 User Manual

Chapter 3: Installing the Switch and Modules

44

To install the switch on a desktop, perform the following procedure:

To install the switch in a rack, refer to “Installing the Switch in an 
Equipment Rack” on page 45.

1. Remove all equipment from the package and store the packaging 

material in a safe place.

2. Turn the switch over and place it on a table.

3. Remove the adhesive backing from the rubber feet.

4. Four rubber feet are provided in the switch shipping container, see 

Figure 11 on page 40. Attach the feet to the bottom of the switch in the 
corners as shown in Figure 14.

Figure 14. Attaching the Rubber Feet

5. Turn the switch over again and place it on a flat, secure surface (such 

as a desk or table) leaving ample space around the unit for ventilation.

6. The next step in the installation process is installing the power supply 

module(s). Go to “Installing Power Supply Module” on page 48 for the 
installation procedure.

[Bottom of Switch]