Allied Telesis AT-PWR06 User Manual

Stack Installation Guide for AT-2552XS L2 Data Center Switch

63

Figure 33. Removing QSFP+ Dust Cover

7. Insert the fiber optic cable to the port on the transceiver, as shown in 

Figure 34, until it clicks in place.

Figure 34. Attaching a Fiber Optic Cable to an QSFP+ Transceiver

8. Repeat this procedure if you have other QSFP+ transceivers to install.

Perform the following procedure to install a QSFP+ MTHTP cable:

1. Remove the QSFP+ MTHTP cable from its shipping container and 

store the packaging material in a safe location.

2. Remove the dust cover from the chassis QSFP+ slot. See Figure 35 

on page 64.