Allied Telesis AT-SBX31GC40 User Manual

Chapter 7: Powering On the Chassis

180

Figure 138. Turning On the Power Supply

11. Do one of the following:



If the chassis has two AT-SBxPWRSYS1 DC Power Supplies, 
repeat this procedure to power on the second power supply.



Otherwise, go to “Monitoring the Initialization Process” on 
page 184.

To attach bare lead wires to the positive and negative terminals on the 
power supply, perform the following procedure:

1. Prepare adequate lengths of two solid or stranded 8 AWG DC power 

wires by stripping them as shown in Figure 139.

Figure 139. Stripping Solid or Stranded DC Power Wires

On/Off Switch