Allied Telesis AT-S63 User Manual
Chapter 1: Overview
42
Remote SNMP
Management
You can also remotely configure the switch using a Simple Network
Management Protocol (SNMP) application, such as AT-View. This
management method requires an understanding of management
information base (MIB) objects.
Management Protocol (SNMP) application, such as AT-View. This
management method requires an understanding of management
information base (MIB) objects.
The AT-S63 Management Software supports the following MIBs:
SNMP MIB-II (RFC 1213)
Bridge MIB (RFC 1493)
Interface Group MIB (RFC 2863)
Ethernet MIB (RFC 1643)
Remote Network MIB (RFC 1757)
Allied Telesis managed switch MIBs
The Allied Telesis managed switch MIBs (atistackinfo.mib and
atistackswitch.mib) are available from the Allied Telesis web site.
atistackswitch.mib) are available from the Allied Telesis web site.
Note
The switch must have an IP address for remote Telnet, SSH, or
SNMP management. For background information, refer to “IP
Configuration” on page 46.
SNMP management. For background information, refer to “IP
Configuration” on page 46.