Allied Telesis AT-S111 User Manual

Chapter 13: Virtual LANs

160

5. You cannot modify the VLAN ID on this web page. If you want to 

delete the VLAN ID, go to “Delete a Tagged VLAN” on page 160 for 
more information.

6. To change the VLAN Name, type a new VLAN Name in the VLAN 

Name field.
For more information about this field, refer to “VLAN Name” on 
page 151.

7. To change the Management VLAN assignment, select one of the 

following choices from the pull-down menu:

Enable: This parameter enables Management VLAN on this 
VLAN. The Management VLAN will be disabled on all other 
VLANs and only be operational on this VLAN.

Caution
If you Enable the Management VLAN on this VLAN and you are 
connected to a Tagged Member port, you may loose your 
connection to the AT-S111 Management software. 

Disable - This parameter disables Management VLAN on this 
VLAN. If you change this parameter from Enable to Disable, the 
Management VLAN will be enabled on the DefaultVLAN 
automatically.

Note
The Management VLAN is always Enabled on the DefaultVLAN and 
cannot be disabled.

8. To change the port selections, click on the port numbers labeled either 

Static Tagged or Static Untagged. 

9. Click Apply.

10. From the main menu on the left side of the page, select Save 

Configuration to Flash to permanently save your changes.

To delete a tagged VLAN, perform the following procedure:

1. From the main menu on the left side of the page, select Bridge.

The Bridge folder expands.

2. From the Bridge folder, select VLAN.

The VLAN folder expands.