Allied Telesis AT-S111 User Manual

AT-GS950/48PS Switch Web Interface User’s Guide

295

You can create and delete DHCP Snooping VLAN settings by following the 
procedures in these sections: 







To define a VLAN that will be a part of the DHCP Snooping feature, do the 
following:

1. From the main menu on the left side of the page, select DHCP 

Snooping.

The DHCP Snooping folder expands.

2. From the DHCP Snooping folder, select VLAN Settings.

The VLAN Settings page is displayed. See Figure 116.

Figure 116. DHCP Snooping VLAN Settings Page.

3. In the VLAN ID field, enter a VLAN ID that has been pre-defined. 

See “Tagged VLAN Configuration” on page 157 for information about 
configuring VLANs.

4. Click Add. 

The new VLAN ID entry is displayed in the table on the page.

5. If you find more than one VLAN ID to configure for DHCP Snooping, 

enter them one at a time by following steps 3 and 4.

6. From the main menu on the left side of the page, select Save 

Configuration to Flash to permanently save your changes.