Allied Telesis AT-SBX31GP24 User Manual

Chapter 2: Installation

68

Perform the following procedure to install the AT-SBx31CFC Card:

The AT-SBx31CFC Card contains active electronic devices, which 
can be damaged by electro-static discharges (ESD). Follow the 
procedure given in “Protection Against Electrostatic Discharge 
(ESD)” on page 60 to guard against ESD damage when unpacking 
and installing this card.

1. Choose a slot in the chassis for the AT-SBx31CFC Fabric Control 

Card. It can be installed in either slot 4 or 5. 

2. Remove all components from the shipping package.

Store the packaging material in a safe location. You may use the 
original shipping material if you need to return the unit to Allied 
Telesis.

3. Ensure that the following components are included in your package. 

– One AT-SBx31CFC Management Fabric Card
– One RJ45 to DB9 management cable

If either item is missing or damaged, contact your Allied Telesis sales 
representative for assistance.

4. Move the locking handles on the front panel to the open position as 

shown in Figure 40.

Figure 40. Opening the Locking Handles of the AT-SBx31CFC Fabric 

Control Card

1822