Allied Telesis AT-SBX3165 User Manual

SwitchBlade x3112 Installation Guide

21

The AT-SBx31CFC Fabric Control Card supports the following features:

ˆ

Supports up to 40 ports at 10 Gbps of full-duplex data exchange or 

 

400 Gbps switching throughput capacity with two AT-SBx31CFC 
Fabric Control Cards installed.

ˆ

Supports a non-redundant switching configuration with one AT-
SBx31CFC Fabric Control Card installed. This configuration is non-
blocking if the Ethernet traffic on each line card does not exceed a line 
rate of 20 Gbps.

ˆ

Supports a redundant, non-blocking switching configuration with two 
AT-SBx31CFC Fabric Control Cards installed.

ˆ

Centralized LED for status of all line cards installed in the AT-SBx3112 
Chassis.

ˆ

Supports an eco-friendly button for enabling/disabling port and status 
LEDs on all line cards.

ˆ

Provides a system reset switch.

ˆ

Supports an SD Card slot for data storage and retrieval.

ˆ

Provides a USB port for data storage and retrieval on a USB device.

ˆ

Supports a remote management via a 10/100/1000 Base-T network 
management port.

ˆ

Supports local management via an RS-232 CONSOLE port.

ˆ

Front loading access is provided for servicing.

ˆ

Supports a hot swappable design for all modules.

The AT-SBx31CFC Fabric Control Card

 

has two types of status LEDs on 

the front panel:

ˆ

ˆ

The System Status LEDs on the AT-SBx31CFC Fabric Control Card 
display general status information about the management system status, 
the power supplies, and the Fan Tray. These LEDs are displayed in 
Figure 5 and described in Table 3 on page 22.

Figure 5  System Status LEDs

1816