Allied Telesis AT-SBX3165 User Manual
Chapter 1: Overview
28
SD Status LED
The SD Status LED on the AT-SBx31CFC Fabric Control Card is
displayed in Figure 9 on page 27 and described in Table 6.
displayed in Figure 9 on page 27 and described in Table 6.
Caution
A loss of data may occur if you remove your SD card when the SD
status LED is flashing green.
status LED is flashing green.
Before removing the card, use the DEACTIVATE MEDIA in the
Switchblade x3112 Management Software. Wait for the SD status
LED to turn off before removing the card.
Table 6. SD Status LED Descriptions
LEDs
State
Description
SD
Off
The SD slot is empty or the SD card is improperly
installed.
installed.
Solid Green
The SD Card is properly installed in the slot and is
ready. You can safely remove the SC Card in this
state.
ready. You can safely remove the SC Card in this
state.
Flashing Green
The AT-SBx31CFC Fabric Control Card is
retrieving or storing data on the SD Card.
retrieving or storing data on the SD Card.
Flashing Amber
The AT-SBx31CFC Fabric Control Card has
detected a problem with the SD card. The line card
may be installed improperly in the slot or there may
be a problem with the line card itself.
detected a problem with the SD card. The line card
may be installed improperly in the slot or there may
be a problem with the line card itself.