Allied Telesis AT-x510-28GPX User Manual

x510 Series Installation Guide for Stand-alone Switches

63

To install SFP transceivers in slots 1 to 24 of the AT-x510-28GSX Switch, 
perform the following procedure:

1. Remove the dust plug from a transceiver slot on the switch. Refer to 

Figure 19.

Figure 19. Removing the Dust Plug from an SFP Slot

2. Remove the transceiver from its shipping container and store the 

packaging material in a safe location.

3. If you are installing the transceiver in a top slot, position the transceiver 

with the Allied Telesis label facing up. If you are installing the 
transceiver in a bottom slot, position the transceiver with the label 
facing down.

4. Slide the transceiver into the slot until it clicks into place, as shown in