Allied Telesis AT-8000GS/POE User Manual
AT-8000GS Series Gigabit Ethernet Switch Installation Guide
15
Port Descriptions
10/100/1000 Base-
T Gigabit
Ethernet Ports
The 10/100/1000Base-T Gigabit ports are RJ-45 ethernet connectors. The
10/100/1000 Mbps ports support half- and full-duplex mode.
10/100/1000 Mbps ports support half- and full-duplex mode.
SFP Port
Small Form Factor Pluggable (SFP) Optical Transceivers are integrated
duplex data links for bi-directional communication over optical fiber,
designed for high-speed Fiber Channel data links. The SFP port is
designated as 100Base-FX or 1000Base-LX/SX.
duplex data links for bi-directional communication over optical fiber,
designed for high-speed Fiber Channel data links. The SFP port is
designated as 100Base-FX or 1000Base-LX/SX.
Table 1 lists the supported SFPs:
RJ-45 Console
Port
The RJ-45 port on the rear panel is an asynchronous serial console port
supporting the RS-232 electrical specification. The port is used to connect
the device to a console managing the device. This interface configuration
is as follows:
supporting the RS-232 electrical specification. The port is used to connect
the device to a console managing the device. This interface configuration
is as follows:
Eight data bits.
One stop bit.
No parity.
Baud rate is 115,200 (default). The user can change the rate from
115,200 down to 2400 bps.
115,200 down to 2400 bps.
Table 1 SFP Support
ATI Reference
Vendors and Parts
AT-SPSX
500m 850nm 1000Base-SX Small Form Pluggable -
Hot Swappable
Hot Swappable
AT-SPLX10
10km 1310nm 1000Base-LX Small Form Pluggable
- Hot Swappable
- Hot Swappable
AT-SPLX40
40km 1310nm 1000Base-LX Small Form Pluggable
- Hot Swappable
- Hot Swappable
AT-SPZX80
80km 1550nm 1000Base-ZX Small Form Pluggable
- Hot Swappable
- Hot Swappable
AT-SPBD10-13
10km Bi-Directional GbE SMF SFP 1310Tx/1490Rx
- Hot Swappable
- Hot Swappable
AT-SPBD10-14
10km Bi-Directional GbE SMF SFP 1490Tx/1310Rx
- Hot Swappable
- Hot Swappable