Allied Telesis AT-8000GS/POE User Manual

Chapter 2: Installation

30

The device should be placed on a table-top. Before installing the unit, verify that the 
location chosen for installation meets the following site requirements.

ˆ

General — Ensure that the power supply is correctly installed.

ˆ

Power — The unit is installed within 1.5 m (5 feet) of a grounded, 
easily accessible outlet 100-250V AC, 50-60Hz.

ˆ

Clearance — There is adequate frontal clearance for operator access. 
Allow clearance for cabling, power connections, and ventilation.

ˆ

Cabling — The cabling is routed to avoid sources of electrical noise 
such as radio transmitters, broadcast amplifiers, power lines, and 
fluorescent lighting fixtures.

ˆ

Ambient Requirements — The ambient unit operating temperature 
range is 0 to 40ºC (32 to 104ºF) at a relative humidity of up to 95%, 
non-condensing. Verify that water or moisture cannot enter the device 
casing.

This section contains information for unpacking the device, and includes the following 
topics:

ˆ

ˆ

ˆ

While unpacking the device, ensure that the following items are included:

ˆ

One AT- AT-8000/xx series unit

ˆ

Rubber Feet for desktop installation

ˆ

Rack-mount kit hardware accessories

ˆ

An AC power cable

ˆ

Stacking cable (Yellow color)

ˆ

Console RS-232 cable with RJ-45 connector

ˆ

Installation guide on CD

The AT-AT-8000 series switches have a Lifetime Warranty (two years for Fan and PSU). 
Go to www.alliedtelesis.com/warranty for the specific terms and conditions of the warranty 
and for warranty registration.

Before unpacking the device, inspect the package and report any evidence of 
damage immediately.