Allied Telesis AT-8000GS/POE User Manual
Chapter 4: Initial Configuration
46
illustrated in the following example.
User Name
A user name is used to manage the device remotely, for example through
SSH, Telnet, or the Web interface. To gain complete administrative
(super-user) control over the device, the highest privilege (15) must be
specified.
SSH, Telnet, or the Web interface. To gain complete administrative
(super-user) control over the device, the highest privilege (15) must be
specified.
Note
Only an administrator (super-user) with the highest privilege level
(15) is allowed to manage the device through the Web browser
interface.
(15) is allowed to manage the device through the Web browser
interface.
For more information about the privilege level, see the CLI Reference
Guide.
Guide.
The configured user name is entered as a login name for remote
management sessions. To configure user name and privilege level, enter
the command at the system prompt as shown in the configuration
example:
management sessions. To configure user name and privilege level, enter
the command at the system prompt as shown in the configuration
example:
Console# show ip interface
Gateway IP Address
Activity Status
Type
-----------------------------
----------------
---------
100.1.1.254
active
static
IP Address
I/F
Type
-----------------------------
----------------
---------
100.1.1.1/16
vlan 1
static
Console> enable
Console# configure
Console(config)# username admin password lee privilege 15
Console# configure
Console(config)# username admin password lee privilege 15