Advantech EKI-7657C User Manual

 

After you have logged in to the system, you will see a command prompt. To enter CLI management interface, 
type in the “enable” command. 
 

 

 
 
The following table lists the CLI commands and description. 
 
 

 

User EXEC 

Begin a session with 
your switch. 

switch> 

Enter logout or quit. 

The user commands available 
at the user level are a subset 
of those available at the 
privileged level. 
Use this mode to 
• 

Perform basic tests. 

Display system information. 

Privileged 
EXEC 

Enter the enable 
command while in 
user EXEC mode. 

switch# 

Enter disable to exit. 

The privileged command is the 
advanced mode 
Use this mode to 
• 

Display advanced function 

status 
• 

Save configuration 

Global 
configuration 

Enter the configure 
command while in 
privileged EXEC 
mode. 

switch(config)# 

To exit to privileged 
EXEC mode, enter 
exit 

or end 

Use this mode to configure the
parameters that are going to 
be applied to your switch 

VLAN database 

Enter the vlan 
database 

command 

while in privileged 
EXEC mode. 

switch(vlan)# 

To exit to user EXEC 
mode, enter exit. 

Use this mode to configure 
VLAN-specific parameters. 
 

Interface 
configuration 

Enter the interface 
command (with a 
specific interface) 
while in global 
configuration mode 

switch(config-if)# 

To exit to global 
configuration mode, 
enter exit. 
To exist to privileged 
EXEC mode, enter 
exit

 or end. 

Use this mode to configure the 
parameters for the switch and 
Ethernet ports.