Advantech EKI-7657C User Manual

 

 

Configure the system event mode to collect system log. 

•  Syslog Client Mode: Select the system log mode—Client Only, Server Only, or Both. 

•  System Log Server IP Address: Assign the system log server IP. 

•  When Syslog Client Mode is set as Client Only, the system event log will only be reserved in the 

switch’s RAM until next reboot. When Syslog Client Mode is set as Server Only, the system log will 
only be sent to the syslog server and you have to type the IP address in the Sysylog Server IP Address 
column. If the Syslog Client Mode is set as Both, the system log will be reserved in the switch’s RAM 
and sent to server. 

• Click Reload  to refresh the events log. 

• Click Clear  to clear all current events log. 

•  After configuring, click  Apply . 

 

 

 

 

 
 

 

You can set up the mail server IP, mail account, password, and forwarded email account for receiving the 
event alert. 
 

•  Email Alert: Enable or disable the email alert function. 

•  SMTP Server IP: Set up the mail server IP address (when Email Alert enabled, this function will then 

be available).