Advantech EKI-7758F User Manual
EKI-7758F User Manual 98
The items in the top menu bar have been introduced. Subsequently, we will go through
how to manage the devices via X-View interface.
how to manage the devices via X-View interface.
C.1 System
C.1.1 System Information
Assign the system name, location and view the system information
• System Name: Assign the name of the switch. The maximum length is 64 bytes.
• System Description: Displays the description of switch. Read only cannot be
modified.
modified.
• System Location: Assign the switch physical location. The maximum length is 64
bytes.
bytes.
• System Contact: Enter the name of contact person or organization.
• System OID: Displays the strings of numbers of the system OID.
• Firmware Version: Displays the switch’s firmware version.
• Kernel Version: Displays the kernel software version.
• MAC Address: Displays the unique hardware address assigned by manufacturer
(default).
(default).
Warning
Don’t set “0” for the first segment of the subnet mask and default gateway
(000.xxx.xxx.xxx).
(000.xxx.xxx.xxx).
Refresh the web screen if the web could not be displayed while you change
the setting.
the setting.
Figure C.12: System information
C.1.2 IP Configuration
User can configure the IP Settings and DHCP client function here.
• DHCP Client: Pull down the Method select menu item and select the DHCP option
to enable the DHCP client function. When DHCP client function is enabled, the
industrial switch will be assigned an IP address from the network DHCP server. The
default IP address will be replaced by the assigned IP address from DHCP server.
to enable the DHCP client function. When DHCP client function is enabled, the
industrial switch will be assigned an IP address from the network DHCP server. The
default IP address will be replaced by the assigned IP address from DHCP server.