Advantech EKI-7758F User Manual

 

EKI-7758F User Manual                                                 54 

 

 

The following information provides the current port statistic information. 

 

•  Port: The port number. 

•  Type: Displays the current speed of connection to the port. 

•  Link: The status of linking—‘Up’ or ‘Down’. 

•  State: It’s set by Port Control. When the state is disabled, the port will not transmit or receive any 
    packet. 

•  Tx Good Packet: The counts of transmitting good packets via this port. 

•  Tx Bad Packet: The counts of transmitting bad packets (including undersize [less than 64 octets], 
    oversize, CRC Align errors, fragments and jabbers packets) via this port. 

•  Rx Good Packet: The counts of receiving good packets via this port. 

•  Rx Bad Packet: The counts of receiving good packets (including undersize [less than 64 octets], 
    oversize, CRC error, fragments and jabbers) via this port. 

•  Tx Abort Packet: The aborted packet while transmitting. 

•  Packet Collision: The counts of collision packet. 

•  Packet Dropped: The counts of dropped packet. 

•  Rx Bcast Packet: The counts of broadcast packet. 

•  Rx Mcast Packet: The counts of multicast packet. 
• click Apply  button to apply the configuration. 

 

 

 
 
 

 

In Port control, you can view every port status that depended on user setting and the negotiation result. 

 

•  Port: select the port that you want to configure. 

•  State: current port status. The port can be set to disable or enable mode. If the port setting is disable  

then will not receive or transmit any packet. 

•  Negotiation: set auto negotiation status of port. 

•  Speed: set the port link speed. 

•  Duplex: set full-duplex or half-duplex mode of the port. 

•  Flow Control: set flow control function is Symmetric or Asymmetric in Full Duplex mode. The default 
    value is Symmetric. 

•  Security: when its state is “On” that means this port accepts only one MAC address.