Advantech EKI-7758F User Manual
EKI-7758F User Manual 76
3.2.4 Security
In this section, you can configure 802.1x and MAC address table.
802.1X/Radius Configuration
802.1x is an IEEE authentication specification that allows a client to connect to a wireless access point or
wired switch but prevents the client from gaining access to the Internet until it provides authority, like a
user name and password that are verified by a separate server.
wired switch but prevents the client from gaining access to the Internet until it provides authority, like a
user name and password that are verified by a separate server.
802.1X/Radius - System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this function.
• IEEE 802.1x Protocol: .enable or disable 802.1x protocol.
• Radius Server IP: set the Radius Server IP address.
• Server Port: set the UDP destination port for authentication requests to the specified Radius Server.
• Accounting Port: set the UDP destination port for accounting requests to the specified Radius Server.
• Shared Key: set an encryption key for using during authentication sessions with the specified radius
server. This key must match the encryption key used on the Radius Server.
• NAS, Identifier: set the identifier for the radius client.
• Click Apply .
• NAS, Identifier: set the identifier for the radius client.
• Click Apply .
Figure 3.44: 802.1x/Radius System Configuration interface
802.1x/Radius - Port Configuration
You can configure 802.1x authentication state for each port. The State provides Disable, Accept, Reject
and Authorize. Use “Space” key change the state value.
and Authorize. Use “Space” key change the state value.
• Reject: the specified port is required to be held in the unauthorized state.
• Accept: the specified port is required to be held in the Authorized state.
• Authorized: the specified port is set to the Authorized or Unauthorized state in accordance with the
outcome of an authentication exchange between the Supplicant and the authentication server.
• Disable: The specified port is required to be held in the Authorized state
• Click Apply .
• Click Apply .