APC AP5616 User Manual
Chapter 3: Basic Operations 34
To broadcast to selected target devices:
1.
Complete one of the following steps:
•
From the Broadcast window, select the Mouse or Keyboard checkboxes for the target
devices that are to receive the broadcast commands.
devices that are to receive the broadcast commands.
•
Press the Up or Down Arrow keys to move the cursor to the target device. Then press
Alt+K
Alt+K
to select the Keyboard checkbox or Alt+M to select the Mouse checkbox. Repeat for
additional target devices.
2.
Click OK to save the settings and return to the Setup window, or click X or press Escape to
return to the Main window.
return to the Main window.
3.
Click Commands. The Commands window opens.
4.
Select the Broadcast Enable checkbox to activate broadcasting. The Broadcast Enable
Confirm/Deny window opens.
Confirm/Deny window opens.
5.
Click OK to enable the broadcast, or click X or press Escape to cancel and return to the
Commands window.
Commands window.
6.
If broadcasting is enabled, type the information or perform the mouse movements that you
want to broadcast from the user station. Only target devices in the list are accessible. The other
user is disabled when broadcast mode is enabled.
want to broadcast from the user station. Only target devices in the list are accessible. The other
user is disabled when broadcast mode is enabled.
To turn broadcasting off:
From the Commands window, clear the Broadcast Enable checkbox.