Fujitsu FMW4503TS128A01 User Manual
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
79
Appendix B
AT Command Set
This Appendix contains a summary of AT commands used by the Stylistic 3500 pen tablet’s modem.
There are several things to note about this set of commands:
• Commands should be entered as ASCII characters.
• Commands should begin with “AT”, with a description of the character after the “AT”.
• The commands are not case-sensitive; upper and lower case characters are treated the same.
• All commands should be followed by the “CR” character stored in “S3”.
• Spaces are counted as characters.
• Command indication can be a selected letter or number message, or it can be no return message by
designation.
• Data format is as follows:
Note: Baud rate and data format are detected by the “AT” character.
Start bit
Data bit
Parity
Stop bit
1
7
even
1
1
7
odd
1
1
7
none
2
1
8
none
1