Sun Microsystems 1290 User Manual
Chapter 1
Unpacking and Installing the Server
9
Installing the Slide Rail Assemblies in a Sun Fire
or Sun StorEdge Cabinet
or Sun StorEdge Cabinet
Sun Fire™ and Sun StorEdge™ cabinets have No. 10-32 UNF tapped screw holes in
the front and rear, which are numbered from bottom to top.
the front and rear, which are numbered from bottom to top.
Note –
The slide rail assemblies are reversible. They can be used on either side of
the cabinet.
▼
To Install the Slide Rail Assemblies in the Bottom Position
1. Adjust the position of the adjustable bracket on each slide rail assembly.
a. Loosen the two nuts that secure the adjustable bracket.
b. Reposition the adjustable bracket to the location stamped “SUNFIRE” on the
rear bracket and secure the adjustable bracket.
2. Adjust the length of each slide rail assembly.
a. Loosen the four nuts that secure the rear bracket.
b. Reposition the rear bracket to the location marked “Sun Fire Cabinet” on the
slide rail assembly and secure the rear bracket.