Sun Microsystems 1290 User Manual

Chapter 1

Unpacking and Installing the Server

▼

To Install the CMA–Lite

1. Secure the pivot at the end of the upper arm to the top rear of the server, using the

two captive screws (

FIGURE 1-18

2. Secure the center pivot point of the CMA to the inside rear of the left hand slide

rail assembly, using the two captive screws.

3. Secure the pivot at the end of the lower arm to the bottom rear of the server, using

the two captive screws.

FIGURE 1-18

CMA–Lite Cable Management Arm

Captive

screws (2)

CMA-LIte

Captive

screws (2)

Captive
screws (2)