Sun Microsystems V40z User Manual

4-48

Sun Fire V20z and Sun Fire V40z Servers—User Guide • March 2005

9. To install the new CPU VRM, press it into the empty socket until it snaps into

place, ensuring that the notch in the CPU VRM aligns with the key in the
connector.

10. (Updated release of Sun Fire V40z server only) Reposition the wire clip to secure

the CPU VRM in place.

a. With your index ﬁngers, gently lift up on either side of the horizontal section of

the wire clip, and reposition it over the top of the VRM.

11. Replace the CPU card into the server (see

FIGURE 4-18

a. Carefully align the rear corners of the CPU card with the plastic alignment

tracks inside the server chassis, then slide the CPU card into the tracks.

b. Press in ﬁrmly and evenly on both corners of the CPU card until it engages the

backplane.

c. Lock down the two plastic latches on the corners of the CPU card to secure it in

place.

12. Close the CPU card door.

13. Replace the front bezel onto the server.