Acer MU.R230E.001 User Manual

 4 System BIOS

90

 

Setting a system password

1

Use the up/down keys to select a password parameter (Set 
Supervisor Password or Set User Password), then press Enter. 

A password box will appear.

2

Type a password then press Enter. 

The password may consist of up to six alphanumeric characters 
(A-Z, a-z, 0-9).  

3

Retype the password to verify the first entry then press Enter 
again. 

4

Press F10.

5

Select Yes to save the new password and close the Setup Utility. 

Supervisor 
Password Is

This parameter indicates whether a 
supervisor password has been assigned. 

Clear

Enabled

User Password Is

This parameter indicates whether a user 
password has been assigned. 

Clear

Enabled

Set Supervisor 
Password

Press Enter to configure the supervisor password.

Set User 
Password

Press Enter to configure the user password.

Password On 
Boot

Select Enabled to activate security check 
during POST. 

Enabled