Acer G901 User Manual
107
Hot-plug indicator board
Replacing the hot-plug indicator board
1
2
Disconnect the ribbon cable from the end of the hot-plug
indicator board.
indicator board.
3
Remove the two plastic rivets that secure the board to the
electronics bay (Figure 55, C).
electronics bay (Figure 55, C).
4
The end of the board where the cable attaches is inserted into a
notch in the chassis. Tilt out the free end of the board and lift the
board out of the notched bracket in the back of the electronics
bay. Two plastic rivet inserts remain in the mounting holes in the
chassis.
notch in the chassis. Tilt out the free end of the board and lift the
board out of the notched bracket in the back of the electronics
bay. Two plastic rivet inserts remain in the mounting holes in the
chassis.
Label
Description
A
Ribbon cable
Figure 55 - Removing the hot-plug indicator board
BB!H:11!vh!.!FO/cppl!!Qbhf!218!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN