DELL HR675 User Manual
48
Using the System Setup Program
Integrated Devices Screen
Table 2-6 lists the options and descriptions for the information fields that
appear on the Integrated Devices screen.
appear on the Integrated Devices screen.
Port F
(Off default)
(Off default)
Displays the model number, drive type, and size of the
device attached to Port F. When set to Auto, the port is
enabled if devices are attached to the port.
device attached to Port F. When set to Auto, the port is
enabled if devices are attached to the port.
Table 2-6.
Integrated Devices Screen Options
Option
Description
Diskette Controller
(Auto default)
(Auto default)
Enables or disables the integrated diskette drive
controller.
controller.
User Accessible USB Ports
(All Ports On default)
(All Ports On default)
Enables or disables the system’s user accessible USB
ports. Options are All Ports On, Only Back Ports On, and
All Ports Off.
ports. Options are All Ports On, Only Back Ports On, and
All Ports Off.
Internal USB Port
(On default)
(On default)
Enables or disables the system’s internal USB port.
Embedded Gb NICx
(NIC1 default: Enabled
with PXE;
Other NICs: Enabled)
(NIC1 default: Enabled
with PXE;
Other NICs: Enabled)
Enables or disables the system's integrated NIC. Options
are Enabled, Enabled with PXE, Enabled with iSCSI
Boot, and Disabled. PXE support allows the system to
boot from the network. Changes take effect after the
system reboots.
are Enabled, Enabled with PXE, Enabled with iSCSI
Boot, and Disabled. PXE support allows the system to
boot from the network. Changes take effect after the
system reboots.
MAC Address
Displays the MAC address for the integrated 10/100/1000
NIC. This field does not have user-selectable settings.
NIC. This field does not have user-selectable settings.
OS Watchdog Timer
(Disabled default)
(Disabled default)
NOTE:
This feature is usable only with operating systems
that support WDAT implementations of the Advanced
Configuration and Power Interface (ACPI) 3.0b
specification.
Configuration and Power Interface (ACPI) 3.0b
specification.
Sets a timer that monitors the operating system for
activity and aids in recovery if the system stops
responding. When this field is set to Enabled, the
operating system is allowed to initialize the timer. When
set to Disabled, the timer is not initialized.
activity and aids in recovery if the system stops
responding. When this field is set to Enabled, the
operating system is allowed to initialize the timer. When
set to Disabled, the timer is not initialized.
Table 2-5.
SATA Configuration Screen (continued)
Option
Description