Lantronix EDS16PS User Manual

Once the bootstrap file has been imported, VIP Access can be enabled and a conduit with the 

DSM will be established. The VIP Statistics shows the current state of the conduit. When 

configured correctly, a conduit with the DSM will be maintained at all times.

Configuring Connect Mode tunnels to use VIP is a simple matter of configuring a tunnel as is 

normally done, but also enabling VIP in the Tunnel Host settings, and using a VIP Name for the 

address.
VIP Accept Mode tunnels do not require special configuration. If VIP access is enabled (in the VIP 

configuration page), then VIP Accept Mode requests from a ManageLinx device will be accepted.

1. Select VIP from the main menu. The VIP Status page appears.