Lantronix EDS16PS User Manual
8: Network Settings
EDS User Guide
49
Network 1 (eth0) Interface Configuration
This page shows the configuration settings for the Ethernet connection and lets you change these
settings.
To view and configure network interface settings:
1. Select Network on the menu bar, if you are not already in the Network web page.
2. Select Interface > Configuration submenus at the top of the page. The Network 1 (eth0)
2. Select Interface > Configuration submenus at the top of the page. The Network 1 (eth0)
Interface Configuration page appears.
Figure 8-2 Network 1 (eth0) Interface Configuration
3. Enter or modify the following settings:
Table 8-3
Network Interface Configuration
Network 1 Interface
Configuration
Settings
Configuration
Settings
Description
BOOTP Client
Select On or Off. At boot up, the device will attempt to obtain an IP address from a
BOOTP server.
Notes:
Overrides the configured IP address, network mask, gateway, hostname, and
domain.
domain.
When DHCP is On, the system automatically uses DHCP, regardless of whether
BOOTP Client is On.
BOOTP Client is On.