Lantronix EDS16PS User Manual
11: Service Settings
EDS User Guide
81
Table 11-3
SNMP
3. Click Submit.
FTP Settings
The FTP web page shows the current File Transfer Protocol (FTP) configuration and various
statistics about the FTP server.
To configure FTP:
1. Select FTP on the menu bar. The FTP page opens to display the current configuration.
SNMP Settings
Description
State
Select Enabled to enable SNMP.
Read Community
Enter the SNMP read-only community string.
Write Community
Enter the SNMP read/write community string.
System Contact
Enter the name of the system contact.
System Name
Enter the system name.
System Description
Enter the system description.
System Location
Enter the system location.
Traps State
Select Enabled to enable the transmission of SNMP Traps.
The Cold Start trap is sent on device boot up, and the
Linkdown trap is sent when the device is rebooted from
software control.
Traps Primary Destination
Enter the primary SNMP trap host.
Traps Secondary
Destination
Destination
Enter the secondary SNMP trap host.