Emerson A5510 User Manual

Thin Web Server                                         Connectivity Module Configuration 

 

 

7-3

 

 

 

 
 
 
 
 

 

4.  When the process is done this message should appear. 

Click  OK to continue. If message does not appear 
(wait), close the application and redo the process 

again. 

 

 

 

1.  Launch the Thin Web Server setup program and 

connect it to the Thin Web Server. 

 

2.  On the menu bar click Utilities, then click Request for 

REBOOT. 

 

3.  Click Yes to continue or No to cancel operation. 
 

 

1.  Make sure the following information is already 

configured in the server. 

- Outgoing Mail Server Email Address 
- At least one receiving email address 
- Originating Email Address 

You can download configuration to confirm these 
settings in the server. 

 

2.  Launch the Thin Web Server setup program. 

 

3.  Connect to the Thin Web Server by clicking 

Communication, then Connect to Server. The 
indicator (bottom right corner) will turn green. 

 

4.  On menu bar click Utilities then TWS Email Tester. 

 

5.  Click Yes to continue or No to cancel. You must hear a 

series of ring sound coming from the TWS which 
indicates that the email was sent. Verify that the email 
went to the receiving email address.