Lantronix EDS32PR User Manual

72 

SNMP Agent 

Select whether SNMP is enabled. Choices are: 

On = SNMP is enabled. (default) 

Off = SNMP is disabled. 

Read Community 

Enter the case-sensitive community name from which the 
EDS will receive trap messages. Default is public. For 
security, the read community name displays as <Configured> 
to show that one is enabled. 

Write Community 

Enter the case-sensitive community name to which the EDS 
will send trap messages. Default is private. For security, the 
write community name displays as <Configured> to show that 
one is enabled. 

System Contact 

Enter the name of the system contact. Default is <None>. 

System Name 

Enter the EDS’s name. 

System Description 

Enter a system description for the EDS. 

System Location 

Enter the geographic location of the EDS. Default is <None>. 

Enable Traps 

Select whether SNMP cold start trap messages are enabled 
at boot. Choices are: 

On = SNMP cold start trap messages are enabled at boot 
time. (default) 

Off = SNMP traps are disabled. 

Primary TrapDest IP 

Enter the primary SNMP trap host. Default is <None>. 

Secondary TrapDest IP 

Enter the secondary SNMP trap host. Default is <None>. 

Clicking the FTP link in the menu bar displays the FTP page. This page displays the 
current File Transfer Protocol (FTP) connection status and various statistics about the 
FTP server. 

Under Current FTP Configuration and Statistics, FTP Password has a Reset link that 
lets you reset the FTP password. If you click this link, a message asks whether you are 
sure you want to reset this information. Click OK to proceed or Cancel to cancel the 
operation.