Intel 5800/120Ld User Manual
Configuring Your System 3-17
Adaptec SCSI Utility Configuration Settings
The following keys are active for all Adaptec SCSI Utility screens:
Key
Action
Arrows
Up and down arrows move from one parameter to another within a screen.
ENTER
Displays options for a configurable parameter. Selects an option.
ESC
Moves back to previous screen or parameter or EXIT if at the Main menu.
F5
Switches between color and monochrome.
F6
Resets to host adapter defaults.
The Table 3-1 shows the normal settings for the Adaptec SCSI Utility and
provides a place for you to record any changes you make to these settings.
provides a place for you to record any changes you make to these settings.
Table 3-1. Adaptec SCSI Utility Setup Configurations
OPTION
RECOMMENDED SETTING
OR DISPLAY ONLY
OR DISPLAY ONLY
YOUR
CONFIGURATION
CONFIGURATION
SCSI Bus Interface Definitions
Host Adapter SCSI ID
7
SCSI Parity Checking
Enabled
Host Adapter SCSI Termination
Enabled
Additional Options
Boot Device Options
Press ENTER for menu
Boot Channel
A First
Boot SCSI ID
0
Boot LUN Number
0
SCSI Device Configuration
Press ENTER for menu
Sync Transfer Rate (MB/Sec)
160
Initiate Wide Negotiation
Yes
Enable Disconnection
Yes
Send Start Unit Command
Yes
Enable Write Back Cache
No
BIOS Multiple LUN Support
No
1
Include in BIOS Scan
Yes
1
Advanced Configuration Options
Press ENTER for menu.
Plug and Play SCAM Support
Disabled
Reset SCSI Bus at IC Initialization
Enabled
1
No effect if BIOS is disabled.