Gateway E-9722R User Manual
www.gateway.com
27
Closing the server case
To close the server case:
1
Make sure that all of the internal cables are arranged inside the case so they will not be
pinched when you close the case.
pinched when you close the case.
2
Place the front top cover on the server, then slide it forward until it clicks into place.
3
Place the back top cover on the server, then slide it forward (1) until it clicks into place.
Replace the screw (2) to hold the top cover in place.
Replace the screw (2) to hold the top cover in place.
4
Reconnect the power cords and all other cables.
Important
The hard drive carriers shown in these illustrations may look different than
the actual hard drive carriers in your server.