Gateway 6400 User Manual
Closing the case
21
Replacing the side cover
To replace the chassis cover:
1
Hold the left side panel at an angle to the chassis and 3/4-inch to the rear.
2
Engage the retaining strip on the bottom edge of the panel with the lip
at the bottom edge of the chassis.
at the bottom edge of the chassis.
3
Swing the top of the panel toward the chassis, engaging the retaining
tabs on the top edge of the side panel with the slots on the chassis.
tabs on the top edge of the side panel with the slots on the chassis.
4
Slide the panel toward the front of the chassis 3/4-inch, securing it in
place.
place.
5
Retighten the thumbscrews and lock the case, if necessary.
05032.book Page 21 Monday, July 10, 2000 11:43 AM