Fujitsu RX330 User Manual
RX330 S1
Operating manual
9
Introduction
Features
Further sources of information:
–
Technical Manual for the relevant rack
–
Manual for the monitor
–
Manual on
ServerView
Server Management
–
Manual for the remote testing and diagnostic system
RemoteView
–
Documentation for boards and drives
–
Documentation for your operating system
–
Information files on your operating system
(See also
1.2
Features
System board
The features of the system board are described in the technical manual for the
system board D2440 for the hardware and in the “BIOS Setup” for the firmware
(see
system board D2440 for the hardware and in the “BIOS Setup” for the firmware
(see
).
Hard disk drives
The server includes two drive cages with up to six (2x3) SAS/SATA2 hard disk
modules. Each hard disk module can accommodate an SAS/SATA2 hard disk
drive with a maximum height of 1 inch. The module is connected to the
SAS/SATA2 backplane wirelessly. This allows hard disk drive modules to be
simply plugged in or pulled out (for further details see
modules. Each hard disk module can accommodate an SAS/SATA2 hard disk
drive with a maximum height of 1 inch. The module is connected to the
SAS/SATA2 backplane wirelessly. This allows hard disk drive modules to be
simply plugged in or pulled out (for further details see
).
The hard disk subsystem is designed for SAS/SATA 2, each with one channel
for each hard disk drive.
for each hard disk drive.
If the server has the corresponding RAID configuration, HDD modules can also
be exchanged during operation.
be exchanged during operation.