Fujitsu RX900 S1 User Manual
268
Maintenance Manual
RX900
S1
Baseboard
14.3.2 Starting the task
Ê
Perform the following procedures:
1.
2.
3.
4.
5. If required to access the installation place: Remove the expansion cards,
see
I
Before removing the expansion cards, take a note on the
installation slot number for each card. Make sure that you reinstall
the card in the slot it was located before the replacement.
installation slot number for each card. Make sure that you reinstall
the card in the slot it was located before the replacement.
14.3.3 Removing the UFM
Figure 167: Removing the UFM board
Ê
Remove the SAS and BBU cable(s) for a convenient access to the mounting
location of the UFM.
location of the UFM.
Ê
Remove the nylon screw on the defective UFM board.
Ê
Disconnect and remove the defective UFM board.
I
The metal spacer remains on the baseboard.