Fujitsu V6.00 User Manual

ServerView Event Manager

 25

If several alarm messages have been received for a server, the one with the 
highest severity level is displayed in the server list. In the bottom display area 
you will only see information on the last alarm message received with this 
severity.

To get an overview of all alarm messages for this server, you can switch to the 
Alarm Monitor function for this server only.

One way of doing this is to select the server in the file tree and start the Alarm 
Monitor function via the menu bar in the Operations Manager main window.

A much quicker way is via the alarm icon (the alarm bell) in the server list. If you 
click the alarm icon, you switch to the Alarm Monitor function for this server only. 
This means that only the alarm messages for this particular server will be visible 
in the list section of the Operations Manager main window. Through appropriate 
selection of an alarm message in the alarm list, you can retrieve further 
information on every alarm message received in the display area.

You can filter the alarm entries by clicking the corresponding filter icons in the 
header of the alarm list.

When you click the filter icon, the associated dialog 

 opens in each case. Make your selection and confirm it with 

 Then, only the filtered entries will be displayed, depending on what you 

have selected. In the standard filter (

), all selection elements are 

selected via checkboxes. In the customized filter (

), you either enter 

your selection directly or using an asterisk as a placeholder. An active filter is 
indicated by a blue filter icon. 

Filter icon in the header of the alarm list.