Fujitsu RXI300 User Manual
System Configurator and Order-Information Guide
A
PRIMERGY RXI300 Status 2008-01-29
Section
II
Processor
A two-way-processor system requires a multi-processor operating system.
Later upgrading to a two-way-processor system is also possible.
For a CPU extension the further CPUs must be of identical TLC (third level cache) and clock rate.
Later upgrading to a two-way-processor system is also possible.
For a CPU extension the further CPUs must be of identical TLC (third level cache) and clock rate.
S26361-F3071-E263
S26361-F3071-E412
Itanium 2 1.6 GHz
Itanium 2 9015 1.4GHz
up to
with 3 MB TLC on Chip,
with 12 MB TLC on Chip,
1x
heat sink and "Easy retention"
heat sink and "Easy retention"
(Intel Codename "Fanwood")
occupies 2nd CPU socket
occupies 2nd CPU socket
occupies 2nd CPU socket
max. 1x per system
max. 1x per system
Section
III
Memory
There are 8 memory slots available (2 banks, 4 modules each).
They can optionally be equipped with 1GB or 2GB registered DDR-RAM modules (PC2100).
The maximal extension is 16GB with 2GB modules!
Any mix of modules within one memory bank is not allowed.
One memory bank is allready occupied
They can optionally be equipped with 1GB or 2GB registered DDR-RAM modules (PC2100).
The maximal extension is 16GB with 2GB modules!
Any mix of modules within one memory bank is not allowed.
One memory bank is allready occupied
S26361-F3070-E400
S26361-F3070-E800
Main memory 4 GB
Main memory 8 GB
PC2100 registered DDR RAM
PC2100 registered DDR RAM
up to
1x
consisting of 4 modules
consisting of 4 modules
with 1 GB each
with 2 GB each
occupies one bank
occupies one bank
max. 1x per system
max. 1x per system
Section
IV
Hard disk drives
S26361-F3066-E173
S26361-F3066-E114
Hard disk 73GB / 10K
Hard disk 146GB / 10K
10000rpm,<5.5ms, min. 8MB Cache
10000rpm,<5.5ms, min. 8MB Cache
Ultra 320 SCSI (320MB/s)
Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pin)
Interface: Wide SCA (80-pin)
hot plug/hot replace tray
hot plug/hot replace tray
occupies one 1" bay
occupies one 1" bay
onb. SCCI or RAID Controller
onb. SCCI or RAID Controller
max. 2x per system
max. 2x per system
up to
2x
S26361-F3066-E130
S26361-F3066-E573
Hard disk 300GB / 10K
Hard disk 73GB / 15K
10000rpm,<5.5ms, min. 8MB Cache
15000rpm,<4ms, min. 8MB Cache
Ultra 320 SCSI (320MB/s)
Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pin)
Interface: Wide SCA (80-pin)
hot plug/hot replace tray
hot plug/hot replace tray
occupies one 1" bay
occupies one 1" bay
onb. SCCI or RAID Controller
onb. SCCI or RAID Controller
max. 2x per system
max. 2x per system
Standard PRIMERGY harddisks must be ordered for upgrade.
To use these harddisks in the RXI300 a simple frame change must be carried out.
Upgrade harddisks are always delivered with standard PRIMERGY harddisk frames.
Unused harddisk positions in the PRIMERGY RXI300 are always equipped with fully
functional empty harddisk frames. Therefore, after the standard frame is removed, the
harddisk has to be mounted in the RXI300 specific empty frame.
The following harddisks are technically released for usage in the PRIMERGY RXI300:
To use these harddisks in the RXI300 a simple frame change must be carried out.
Upgrade harddisks are always delivered with standard PRIMERGY harddisk frames.
Unused harddisk positions in the PRIMERGY RXI300 are always equipped with fully
functional empty harddisk frames. Therefore, after the standard frame is removed, the
harddisk has to be mounted in the RXI300 specific empty frame.
The following harddisks are technically released for usage in the PRIMERGY RXI300:
S26361-F3121-L173
HDD U320 10k 73GB hot plug 1"
S26361-F3121-L114
HDD U320 10k 146GB hot plug 1"
S26361-F3121-L130
HDD U320 10k 300GB hot plug 1"
S26361-F3121-L573
HDD U320 15k 73GB hot plug 1"
B
Fujitsu Siemens Computers
Enterprise Products PRIMERGY Server
6 of 10