Fujitsu BX600 S2 User Manual
PRIMERGY BX600 S2 Basic Unit
113
11
Fibre Channel Pass-Thru Blade
The 2/2 Gbit Fibre Channel pass-thru blade, hereinafter referred to as FC pass-
thru blade, provides 10 ports for the bypass connection between FC daughter
boards (see manual for the relevant server blade type) and optical transceivers
for serial FC I/O and general-purpose I/O signals. The FC pass-thru blade
features 2 Gbit/sec Fibre Channel speed. It also provides LEDs for each FC port
to indicate the link status.
thru blade, provides 10 ports for the bypass connection between FC daughter
boards (see manual for the relevant server blade type) and optical transceivers
for serial FC I/O and general-purpose I/O signals. The FC pass-thru blade
features 2 Gbit/sec Fibre Channel speed. It also provides LEDs for each FC port
to indicate the link status.
Figure 64: Fibre Channel pass-thru blade
The PRIMERGY BX600 S2 basic unit can be fitted with one or two FC pass-thru
blades. The slots for these blades are on the back of the system unit (NET 3 and
NET4 in
blades. The slots for these blades are on the back of the system unit (NET 3 and
NET4 in
). If Fibre Channel functionality is to be available
for one or more server blades, at least one FC pass-thru blade or FC switch
blade must be installed. The assignment of the Fibre Channel channels is
described in
blade must be installed. The assignment of the Fibre Channel channels is
described in
FC pass-thru blade
SFP module