Fujitsu BX600 S2 User Manual
PRIMERGY BX600 S2 Basic Unit
125
12
Management Blade
The PRIMERGY BX600 S2 basic unit accommodates two hot-swappable,
redundant management blades with an integrated management solution for
complete remote administration of the system.
redundant management blades with an integrated management solution for
complete remote administration of the system.
I
The management blades provide convenient user interfaces: A web
interface is available as well as a console menu interface using the Telnet
protocol. For a detailed description please see the manual “RemoteView
Management Blade - User Interface Description”.
interface is available as well as a console menu interface using the Telnet
protocol. For a detailed description please see the manual “RemoteView
Management Blade - User Interface Description”.
The management blades have separate, 10 Mbit LAN connections to maintain
accessibility to the system even with the standard traffic network connections
down.
accessibility to the system even with the standard traffic network connections
down.
The slots for the management blades are located on the rear of the basic unit
(
(
).
Figure 77: Management blade slots
I
Important note:
Management blades to be used in the PRIMERGY BX600 S2 base unit
must have order number A3C40073243. Compatibility with the S1 model
management blade used in the PRIMERGY BX600 base unit is not
provided.
must have order number A3C40073243. Compatibility with the S1 model
management blade used in the PRIMERGY BX600 base unit is not
provided.
Management blade 1
Management blade 2