Fujitsu TX200 S6 User Manual

18

Operating Manual

 TX200 

S6

Further information on other SAS/SATA RAID controllers (e.g. for 
operating external SAS/SATA hard disk drives or tape drives) is available 
on ServerView Suite DVD 2 under 

 - 

 - 

 - 

.

The server has three 5.25-inch bays that can be used in various ways:

The individual bays can be equipped with any 3.5-inch drives (height:1.6 inch).

You can install a multibay (DVD-LSD/LSP) in the top bay. You can install a 
slimline DVD drive and the ServerView Local Service Display or ServerView 
Local Service Panel in the multibay (DVD-LSD/LSP).

The following expansion boxes are also available depending on the hard disk 
configuration selected:

–

With one drive cage for up to two 3.5-inch SAS hard disk drives:

You can install an extension box for up to two 3.5-inch SAS hard disk drives 
in the two bottom bays. This box has bays for a slimline DVD drive, the 
ServerView Local Service Display/ServerView Local Service Panel, and up 
to two 3.5-inch SAS hard disk drives.

–

With a drive cage for up to eight 2.5-inch SAS/SATA hard disk drives:

You can install an extension box for up to eight 2.5-inch SAS/SATA hard disk 
drives in the two bottom bays.

I

The HDD extension box for 2.5-inch SAS/SATA hard disk drives 
requires an additional SAS/SATA RAID controller.

I

Please note the following:

–

A DVD drive must have been installed in order to operate the server.

–

The accessible drives cannot be replaced during operation.

–

Access to the accessible drives may have to be free in order to 
operate tape drives (see 

).