Fujitsu TX300 User Manual
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
32
Options Guide
TX300 S6
Rack model
Preparation
4.2
Rack model
Ê
Terminate all applications and shut down the server correctly.
Ê
If your operating system has not switched off the server, press the On/Off
button.
button.
Ê
Pull all power cords out of the power outlet.
4.2.1
Opening the server
Pulling the server out of the rack and opening the server
Figure 7: Pulling the server out of the rack
Ê
Loosen the two knurled screws (1) and pull the server as far as possible out
of the rack (2).
of the rack (2).
Ê
Pull the locking lever as far as it will go (see also
). This
pushes the top cover backward.
V
CAUTION!
Do not use the pulled-out server as a surface on which to put things or
as a work surface, and strictly avoid leaning on or against it.
as a work surface, and strictly avoid leaning on or against it.
Ê
Remove the top cover.
0
0
/
/