Fujitsu 2000 SERIES User Manual
Appendix F Status Checks with LEDs
F.4
F.4
Button and switch
228
C122-E175-01EN
F.4
Button and switch
PRIMEQUEST 2000 series comes equipped with below buttons and switches.
-
OPL Location button
When you push the Location button of OPL, Location LED turns on. Pushing this button again, Location
LED turns off.
When you push the Location button of OPL, Location LED turns on. Pushing this button again, Location
LED turns off.
-
DU Attention Button
Although there is the Attention button in DU, it is not used. Nothing happens if you push this button.
Although there is the Attention button in DU, it is not used. Nothing happens if you push this button.
-
PCI_Box switch
You can set 0 to 3 to PCI_Box as PCI_Box number by switch of PCI_Box. If multiple PCI_Boxes are
connected in a partition, be sure to set different number to each PCI_Box so that the number of a
PCI_Box is not same as that of other PCI_Boxes.
Below PCI_Box numbers can be used in each model.
You can set 0 to 3 to PCI_Box as PCI_Box number by switch of PCI_Box. If multiple PCI_Boxes are
connected in a partition, be sure to set different number to each PCI_Box so that the number of a
PCI_Box is not same as that of other PCI_Boxes.
Below PCI_Box numbers can be used in each model.
TABLE F.30 Usable PCI_Box number and models
PCI_Box
number
Model
2400E
2800E
2800B (*1)
0
Usable
Usable
Not usable
1
Usable
Usable
Not usable
2
Usable
Usable
Not usable
3
Usable
Usable
Not usable
(*1) PCI_Box cannot be used in PRIMEQUEST 2800B.