Fujitsu C122-E119EN User Manual

This section describes the connector type and the correspondence between the UPC interface and the signal cable

pins.

 

D-SUB9 male connector (receptacle: female)

 

The figure below shows the UPC interface and pin assignment of the signal cable.

Unused pins (pins 1, 2, 3, 4, and 8 in the 

) must not be used.

The pin assignment on the cable side is as shown below.
 

FIGURE B.3 Correspondence between UPC interface and signal cable pins
 

PRIMEQUEST 1000 Series Hardware Installation Manual
APPENDIX B UPC Interface

86

C122-H004-07EN