Fujitsu C122-E119EN User Manual

- A = Number of mounted SBs (1 to 4)

- B = Number of mounted IO Units (1 or 2)

- C = Number of mounted expansion power supply units (0 to 2)

*3 If the intake air temperature is high (but within the normal temperature range), the fan enters high-speed mode

     even when operation is normal.

*4 Condensation is not permitted.

*5 The temperature requirements depend on the altitude at the installation site.

- Installation at 0 to 500 m (0 to 1640 ft.) above sea level: 5 to 35°C (41 to 95.0°F)

- Installation at 500 to 1000 m (1640 to 3281 ft.) above sea level: 5 to 34°C (41 to 93.2°F)

- Installation at 1000 to 1500 m (3281 to 4921 ft.) above sea level: 5 to 33°C (41 to 91.4°F)

- Installation at 1500 to 3000 m (4921 to 9843 ft.) above sea level: 5 to 30°C (41 to 86.0°F)

        The altitude specifications for the installation site include an allowable margin of error of ±100 m.

*6 "Non-operating" refers to the condition where a device has been disconnected from the power supply and stored.

*7 The actual acoustic noise level depends on the listener's location and the rack mounting conditions.

*8 The noise and acoustic power levels depend on the ambient temperature.

*9 "Non-operating" refers to the installed device in the power-off state.

*10 This is the value during operation.

*11 This value is for a single input cable.

*12 This value is for a single device.

TABLE 1.4 PCI_Box installation specifications

Item

Description

External dimensions

[mm (in.)]

Width

482 (18.98)

Depth (*1)

740 (29.13)

Height

175 (6.89)

Weight [kg (lb)] (*2)

35 (77)

Air conditioning

requirements

Maximum heat output [kJ/h (BTU/h)]

1,656 (1,570)

Exhaust air flow

[m

3

/min (ft

3

/min)]

(*3)

FAN at low speed (Low)

3 (106)

FAN at normal speed (Normal)

4 (141)

FAN at high speed (High)

5 (177)

Temperature and

humidity

requirements (*4)

Operating

Temperature [°C (°F)]

(*5)

Humidity [%RH]

20 to 80

Maximum wet-bulb

temperature [°C (°F)]

29 (84.2)

Non-operating (*6) Temperature [°C (°F)]

0 to 50 (32 to 122)

Humidity [%RH]

8 to 80

Maximum wet-bulb

temperature [°C (°F)]

29 (84.2)

PRIMEQUEST 1000 Series Hardware Installation Manual
CHAPTER 1 Installation Information

9

C122-H004-07EN